Model: project-sub-ohm-carbon-fiber-flaskman-by-vapoBy: Sub-OhmProduct Description:Ergonomics, high level craftsmanship, and the most advanced vaping chipset collide with style and exclusivity collide to bring you the Project Sub-Ohm™ Carbon Fiber Edition "flaskmaN"™ by Vapor Flask!
Made proudly in the USA!
Introducing the Limited Edition Project Sub-Ohm™ Carbon Fiber Edition"flaskmaN"™ by Vapor Flask! Add a some visual flair to your collection, utilizing a Carbon Fiber Gel Wrap preinstalled to the "flaskmaN"™. A collaborative effort bringing together two of your favorite brands, the "flaskmaN"™ retains the extremely high quality craftsmanship that Vapor Flask has been known for with the now iconic branding of Project Sub-Ohm™. Proudly designed and manufactured in the United States of America, the "flaskmaN"™ carries the signature ergonomic curve of the original Vapor Flask. Usability and vapability is first and foremost in the design of the enclosure, focusing on developing an organic fit and form for the user's hand. The top mounted screen is thoughtfully positioned for instant visibility throughout use. Manufactured out of top grade 6061 Aluminum and finished with a carbon fiber gel wrap, the "flaskmaN"™ utilizes Evolv's vaunted DNA 40, bringing one of the most sought after boards and pairing it in an incredible enclosure. Not only does it have industry leading output accuracy, but the DNA 40 is the first board to utilize a direct temperature control during operation. Not only does this entail a revolutionary style of vaping but also ensures a high level of safety, efficiency, and usability. Stainless Steel 510 fittings and threading ensure durability, and a brass spring loaded pin accommodates any standard 510 threaded atomizer, while also flush fitting a 22mm atomizer. An easily accessible Micro USB Charging Port allows for fast and quick charging for on the go usability and longevity. Independently accessed dual 18650 battery ports combine for incredible battery life. Each port is fitted with a brass negative contact slotted for easy removal and installation of each battery. All new red firing and adjustment buttons exclusive to the Limited Edition Project Sub-Ohm™ Carbon Fiber Edition "flaskmaN"™ create a striking visual contrast that affirms the exclusivity of this edition. Beauty, precision, exclusivity. The Project Sub-Ohm™ Carbon Fiber Edition "flaskmaN"™ by Vapor Flask! Product Includes:
(1) Project Sub-Ohm Carbon Fiber Edition "flaskmaN"™ by Vapor Flask
(1) Braided Micro USB Charging Cord
(1) Vapor Flask Carrying Pouch
6061 Aluminum Enclosure
Real Carbon Fiber Gel Wrap
Exclusive Custom Milled Red Aluminum Buttons
DNA 40 by Evolv Certified Device
Stainless Steel 510 Fittings and Threading
Spring-loaded Brass Positive Pin
Brass Negative Discs
DNA 40 Features:
Power Regulated Digital Switch-Mode DC-DC Converter
Utilizes a Small OLED Display
Step Up/Step Down Topology
Synchronous Rectification for Maximum Battery Life and Minimal Heat Generation
Output Power: 1 - 40 Watts
Output Voltage: 1 - 9.0 Volts
Output Current: 16.0 Amps
Atomizer Resistance, Standard Wire: 0.16 - 2.0 Ohms
Atomizer Resistance, Temperature Sensing Wire, Cold: 0.10 - 1.0 Ohm
Input Voltage: 3.1 - 4.3 Volts
Input Current: 0.5 - 16 Amps
FOR USE WITH (2) 30 AMP IMR/INR BATTERIES OR HIGHER ONLY!
Both Batteries Must Be Inserted Positive Side Towards the 510 and Screen!
In order to use temperature control output, coils must be built using non-resistant wire. Evolv recommends Ni200.
Do not use any batteries if the outside wrapper has come off!
Turn off the device before pulling your batteries out.
Warning: Project Sub-Ohm™ is a product design and development studio for Electronic Cigarettes and do not involve in any product manufacturing process. Use this product at your own risk. In no event, regardless of cause shall VaporDNA™ and Project Sub-Ohm™ be liable for any type of bodily injury or property damage.
***Always turn off the device and take the battery out when not in use!
Advanced User Item. Use AT YOUR OWN RISK!
FOR USE WITH 30 AMPS OR HIGHER IMR BATTERIES ONLY!!!
NOTE: Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse of mishandling of Li-Ion batteries and chargers. We only recommend using Lithium Ion rechargeable batteries with a control circuit (protection PCB) to assure safe charge, discharge, etc, use of lithium ion batteries without a protection circuit is potentially hazardous
VaporDNA™ and Project Sub-Ohm™ will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.
Project Sub-Ohm™ is a sub-division of VaporDNA™. All pictures are based on practicality, copyright reserved.* please refer to each merchant for detailed item description